Sand Dust Test Chamber

Sand Dust Test Chamber

Harga	Call Us
Deskripsi Produk	Sand Dust Test Chamber Dust test chambers are capacity of 800 liters and 1000 liters. Considering that some specimens are smaller and less, so we designed and produced this small dust chambers. Sand and dust test chambers are made for the simulation of dust and sand conditions. These dust test chambers are used to test the exposure of test the exposure of automotive and electronic components under extreme environmental conditions in order to validate product seal.Dust ingress test methods included IEC60529, ISO20653 and many others. The airflow circulates upward from the bottom, blowing the dust circulation,forcing dust around the specimens. All models are upgrade to programmable controller and Ethernet access that provides simple operation and control. Description Dust test chambers are capacity of 800 liters and 1000 liters. Considering that some specimens are smaller and less, so we designed and produced this small dust chambers. Sand and dust test chambers are made for the simulation of dust and sand conditions. These dust test chambers are used to test the exposure of test the exposure of automotive and electronic components under extreme environmental conditions in order to validate product seal.Dust ingress test methods included IEC60529, ISO20653 and many others. The airflow circulates upward from the bottom, blowing the dust circulation,forcing dust around the specimens. All models are upgrade to programmable controller and Ethernet access that provides simple operation and control. Features Small capacity of 800 liters and 1000 liters. IP6X IP5X ingress testing Dust blowing through special wind tunnel and air outlet Constant dust concentration Programmable color LCD touch screen controller Multi-language interface USB and Ethernet A viewing window with wiper Strong stainless steel specimen shelves Build -in power interface and vacuum system for specimens Internal illumination in test room Safety protection system Talcum powder for dust chamber CE mark, ISO17025 calibration Specification Model TR-DI-800 TR-DI-1000 TR-DI-1500 TR-DI-2000 Internal dimension mm 800*1000*1000 1000*1000*1000 1000*1500*1000 1000*2000*1000 Overall dimension mm 1040*1450*1960 1200*1450*1960 1250*1900*1960 1300*2400*1960 Temperature range Ambient to +50℃ Normal wire diameter 50um Normal width of a gap between wire 75um The Talcum powder amount 2kg ~ 4kg/m3 Fight time 0 ~ 99H59M Fan cycle time 0 ~ 99H59M Specimen power outlet Dust-proof socket AC220V 16A Controller Programmable color LCD touch screen controller, Multi-language interface, Ethernet , USB Vacuum system Equipped with a pressure gauge, air filter, pressure regulator, connecting tube Circulating fan Enclosed alloy low-noise motor, multi-vane centrifugal fan Heating system Independent Nichrome electronic heating system Exterior material Steel Plate with protective coating Interior material SUS304 stainless steel Safety System Electric leakage, short circuit, Over-temperature, motor overheating Over-current protection/ Power failure memory function for controller Power supply 380V 50HZ

Harga	Call Us
Deskripsi Produk	Sand Dust Test Chamber Dust test chambers are capacity of 800 liters and 1000 liters. Considering that some specimens are smaller and less, so we designed and produced this small dust chambers. Sand and dust test chambers are made for the simulation of dust and sand conditions. These dust test chambers are used to test the exposure of test the exposure of automotive and electronic components under extreme environmental conditions in order to validate product seal.Dust ingress test methods included IEC60529, ISO20653 and many others. The airflow circulates upward from the bottom, blowing the dust circulation,forcing dust around the specimens. All models are upgrade to programmable controller and Ethernet access that provides simple operation and control. Description Dust test chambers are capacity of 800 liters and 1000 liters. Considering that some specimens are smaller and less, so we designed and produced this small dust chambers. Sand and dust test chambers are made for the simulation of dust and sand conditions. These dust test chambers are used to test the exposure of test the exposure of automotive and electronic components under extreme environmental conditions in order to validate product seal.Dust ingress test methods included IEC60529, ISO20653 and many others. The airflow circulates upward from the bottom, blowing the dust circulation,forcing dust around the specimens. All models are upgrade to programmable controller and Ethernet access that provides simple operation and control. Features Small capacity of 800 liters and 1000 liters. IP6X IP5X ingress testing Dust blowing through special wind tunnel and air outlet Constant dust concentration Programmable color LCD touch screen controller Multi-language interface USB and Ethernet A viewing window with wiper Strong stainless steel specimen shelves Build -in power interface and vacuum system for specimens Internal illumination in test room Safety protection system Talcum powder for dust chamber CE mark, ISO17025 calibration Specification Model TR-DI-800 TR-DI-1000 TR-DI-1500 TR-DI-2000 Internal dimension mm 800*1000*1000 1000*1000*1000 1000*1500*1000 1000*2000*1000 Overall dimension mm 1040*1450*1960 1200*1450*1960 1250*1900*1960 1300*2400*1960 Temperature range Ambient to +50℃ Normal wire diameter 50um Normal width of a gap between wire 75um The Talcum powder amount 2kg ~ 4kg/m3 Fight time 0 ~ 99H59M Fan cycle time 0 ~ 99H59M Specimen power outlet Dust-proof socket AC220V 16A Controller Programmable color LCD touch screen controller, Multi-language interface, Ethernet , USB Vacuum system Equipped with a pressure gauge, air filter, pressure regulator, connecting tube Circulating fan Enclosed alloy low-noise motor, multi-vane centrifugal fan Heating system Independent Nichrome electronic heating system Exterior material Steel Plate with protective coating Interior material SUS304 stainless steel Safety System Electric leakage, short circuit, Over-temperature, motor overheating Over-current protection/ Power failure memory function for controller Power supply 380V 50HZ

TR-MIL STD 810 Blowing Sand Dust Test Chamber

TR-MIL STD 810 Blowing Sand Dust Test Chamber

Harga	Call Us
Deskripsi Produk	TR-MIL STD 810 Blowing Sand Dust Test Chamber LIB TRMIL STD blowing sand dust test chamber is used for evaluating the resistance of a system to dust and sand particles in accordance with TR-MIL-STD-810g. The purpose of dust (< 150μm) procedure: This test procedure is performed to assist measure the flexibility of equipage to resist the results of mud that will hinder openings, penetrate into cracks, crevices, bearings, and joints, and to judge the effectiveness of filters. Description Dust (< 150μm) procedure: This test procedure is performed to assist measure the flexibility of equipage to resist the results of mud that will hinder openings, penetrate into cracks, crevices, bearings, and joints, and to judge the effectiveness of filters. Sand (150 to 850μm particle size) procedure: The Sand (150 to 850μm particle size) procedure is performed to assist measure the flexibility of equipage to be hold on and operated in processing sand conditions while not degrading performance, effectiveness, responsibility, and maintainability because of abrasion (erosion) or preventive effects of huge, sharp-edged particles.  Features Temperature: 10℃～80℃ Blowing Dust: 10.7±7g/ m³ Blowing Sand: 0.18+0.2g/m³; 1.1+0.3g/m³; 2.2+0.5g/m³ Large Centrifugal Fan Wind Speed Control Dust Concentration Control Internal illumination in test room Safety protection system   Specification Model TR-DIM-1000 Internal Dimension 1000*1000*1000mm D*W*H Overall Dimension 2800*3500*2000mm D*W*H Interior Volume 1000L Blowing Dust Air velocity 1.5 -8.9m/s Concentration of dust 10.7±7g/ m³ Dust particles ＜   150μm Blowing sand Air velocity 18.0 -29.0m/s Concentration of sand 0.18+0.2g/m³; 1.1+0.3g/m³;   2.2+0.5g/m³ Sand particles 149μm - 600μm, 600μm - 850μm Controller Programmable   color LCD touch screen controller Door Lock Electromagnetic lock Testing Platform   Diameter 600mm Testing Platform Speed 1-7 r.p.m Dust Detector Integrated dust detector Dust collection and cleaning Equipped with a vacuum cleaner interface,   an electric vibrator is installed on the entire air duct and the wall of the   test chamber, which can shake off and disperse the dust absorbed on the wall. Exterior Material A3 Steel Plate with   protective coating Interior Material SUS304 stainless steel Power Supply 380V 50Hz Maximum Noise 65 dBA Standard TR-MIL-STD- 810g

Harga	Call Us
Deskripsi Produk	TR-MIL STD 810 Blowing Sand Dust Test Chamber LIB TRMIL STD blowing sand dust test chamber is used for evaluating the resistance of a system to dust and sand particles in accordance with TR-MIL-STD-810g. The purpose of dust (< 150μm) procedure: This test procedure is performed to assist measure the flexibility of equipage to resist the results of mud that will hinder openings, penetrate into cracks, crevices, bearings, and joints, and to judge the effectiveness of filters. Description Dust (< 150μm) procedure: This test procedure is performed to assist measure the flexibility of equipage to resist the results of mud that will hinder openings, penetrate into cracks, crevices, bearings, and joints, and to judge the effectiveness of filters. Sand (150 to 850μm particle size) procedure: The Sand (150 to 850μm particle size) procedure is performed to assist measure the flexibility of equipage to be hold on and operated in processing sand conditions while not degrading performance, effectiveness, responsibility, and maintainability because of abrasion (erosion) or preventive effects of huge, sharp-edged particles.  Features Temperature: 10℃～80℃ Blowing Dust: 10.7±7g/ m³ Blowing Sand: 0.18+0.2g/m³; 1.1+0.3g/m³; 2.2+0.5g/m³ Large Centrifugal Fan Wind Speed Control Dust Concentration Control Internal illumination in test room Safety protection system   Specification Model TR-DIM-1000 Internal Dimension 1000*1000*1000mm D*W*H Overall Dimension 2800*3500*2000mm D*W*H Interior Volume 1000L Blowing Dust Air velocity 1.5 -8.9m/s Concentration of dust 10.7±7g/ m³ Dust particles ＜   150μm Blowing sand Air velocity 18.0 -29.0m/s Concentration of sand 0.18+0.2g/m³; 1.1+0.3g/m³;   2.2+0.5g/m³ Sand particles 149μm - 600μm, 600μm - 850μm Controller Programmable   color LCD touch screen controller Door Lock Electromagnetic lock Testing Platform   Diameter 600mm Testing Platform Speed 1-7 r.p.m Dust Detector Integrated dust detector Dust collection and cleaning Equipped with a vacuum cleaner interface,   an electric vibrator is installed on the entire air duct and the wall of the   test chamber, which can shake off and disperse the dust absorbed on the wall. Exterior Material A3 Steel Plate with   protective coating Interior Material SUS304 stainless steel Power Supply 380V 50Hz Maximum Noise 65 dBA Standard TR-MIL-STD- 810g